DSC PC585 with GT/GT+/GET quick setup¶

Short wiring and programming steps to connect the GT/GT+/GET communicator to DSC PC585 (PC1404, PC1565, PC1616, PC1832, PC1864, PC5020) panel using KeyBus, then enroll the system in Protegus2. Use this alongside the full manuals for all other settings. (Terminal labels differ slightly between GT/GT+/GET, but the connections are the same.)

1. Prerequisites¶

1. GT/GT+/GET firmware 1.21, SIM inserted, PIN disabled, data plan active.
2. DSC PC585 (PC1404, PC1565, PC1616, PC1832, PC1864, PC5020) panel with keypad access (installer code available).
3. CMS account number if reporting to CMS.
4. Protegus2 company/installer account and communicator IMEI.

2. Wiring¶

Follow the schematic below to connect the communicator to the panel:

DSC panels do not need to be programmed.

3. Add system to Protegus2¶

Step 1. Tap Add new system.

Step 2. Enter the communicator IMEI, tap Next.

Step 3. Select security company.

Step 4. Choose DSC.

Step 5. Choose PC 585 (PC1404, PC1565, PC1616, PC1832, PC1864, PC5020).

Step 6. Enter Object ID and Module ID, tap Next.

Step 7. Wait while data is written.

Step 8. Tap Add to Protegus2.

Step 9. Enter system Name, tap Next.

Step 10. Tap Skip.

Step 11. Tap on system.

Step 12. Wait 1 minute for completion and tap Transfer.

Step 13. Enter the e-mail of the user to whom the installer will transfer the system. Tap Transfer.

Step 14. The system will appear in Protegus on the user's phone.